Spillo Steel concealed floor-mounting body — FIMA F1205

Spillo Steel concealed floor-mounting body — FIMA F1205

F1205 concealed body for floor preparation of the Spillo Steel F3084/6 bath mixer. Sold separately; the external mixer is excluded.

Selection and installation

Pairing verified on the official F3084/6 page: one body is required per mixer. Prepare the body during floor works before fitting the external assembly. This is not a selectable decorative finish and is not a complete mixer. Do not assume compatibility with other codes without manufacturer verification. Official manual 9900_1205, revised May 2026, shows the body preparation with MIN 75 / MAX 135 mm installation references: check the dimension on the drawing before closing the floor. It indicates MIN 3 / MAX 5 bar pressure, maximum temperature 80 °C and 15–65 °C references; the 10 bar test is a commissioning stage, not normal operating pressure.

Fitting and care

Have a qualified installer prepare, connect, waterproof and leak-test the assembly. Flush pipework before connection and keep the body protected during construction. Clean external surfaces with a soft cloth and stainless-steel-compatible products; avoid abrasives and chlorinated cleaners.

Documentation

Manual 9900_1205 linked below is supplied by the manufacturer on the compatible F3084/6 mixer page and illustrates this body. The standalone F1205 page does not publish separate documents; this link provides the installation sequence.

Technical documents

• F1205 installation instructions