AGB Scivola Tre Class bathroom lock

Complete Wave system — matching components

Below are the configurations compatible with this item and their matching components. Choose one configuration for the door type and function; do not combine alternative configurations. Every item is purchased separately; check package contents, dimensions and finish before ordering.

Components and compatible configurations

Each item is listed once. The final column identifies the configurations where it is used: choose one handle and its matching combination, not every item listed.

	Component	When needed	Qty per door		Compatible configuration
	AGB Wave bathroom handles – sliding doors	Handle kit for this configuration	1	Model / finish / codeSelect a variantB300020201S — Door thickness 38–50 mm / Anodized brushed silver (01S)B300020232 — Door thickness 38–50 mm / Satin chromium plated (32)B300020242S — Door thickness 38–50 mm / Satin light bronze (42S)B300020258S — Door thickness 38–50 mm / Satin matt brass plated (58S)B300020293 — Door thickness 38–50 mm / Matt black (93)B3000202FM — Door thickness 38–50 mm / Matt white (FM)B300020301S — Door thickness 45–60 mm / Anodized brushed silver (01S)B300020332 — Door thickness 45–60 mm / Satin chromium plated (32)B300020342S — Door thickness 45–60 mm / Satin light bronze (42S)B300020358S — Door thickness 45–60 mm / Satin matt brass plated (58S)B300020393 — Door thickness 45–60 mm / Matt black (93)B3000203FM — Door thickness 45–60 mm / Matt white (FM) Quantity Add to cartAdd to quotation	AGB Wave bathroom handles – sliding doors
	AGB Scivola Tre Class bathroom lock	Required unless already present	1	Model / finish / codeSelect a variantB089815034 — Backset 50 mm / Matt chromium plated (34)B089815042V — Backset 50 mm / Light bronze plated varnished (42V)B089815058V — Backset 50 mm / Matt brass plated varnished (58V)B089815093 — Backset 50 mm / Matt black (93)B0898150FM — Backset 50 mm / Matt white (FM)B089815002 — Backset 50 mm / Bronze plated (02)B089815003 — Backset 50 mm / Enamelled brass plated (03)B089815006 — Backset 50 mm / Nickel plated (06)B089815023 — Backset 50 mm / Matt brass plated (23)B089815042 — Backset 50 mm / Light bronze plated (42) Quantity Add to cartAdd to quotation	AGB Wave bathroom handles – sliding doors

For Scivola Tre Class check the supplied frame striker/tray and frame compatibility before ordering extras. B08984 is not the hook striker.

The configurations above are alternatives. This item appears in the checklist to show the complete system: do not add it twice.

Machining and installation: dedicated Wave preparation

Standard lever-handle drilling is insufficient: Wave needs recessed seats on both door faces, a coordinated lock mortice and frame preparation. Check existing holes and door construction before conversion; this is not a universal replacement.

1. Identify swinging/sliding door, passage/privacy/cylinder function, thickness, rebate, backset and lock position.
2. Give the installer the AGB drawing for the exact combination. Privacy and cylinder versions may place the handle differently; outside plate dimensions are not a routing template.
3. Machine the recesses, mortice and striker seats from that drawing; choose the supplied sleeves and screws from the AGB door-thickness table.
4. Fit the lock and correctly oriented handles, then the covers. Secure the cylinder only after fitting the handle and cover.
5. Align and adjust the striker; test operation with the door open, then closed. For sliding doors also check leaf extraction and the pull-out lever.

The sleeve and screw lengths in the manual refer to kit hardware: check the supplied contents before ordering extras. A qualified installer must use the drawing matching the ordered variant.

Original AGB documentation

• Assembly instructions IT/EN — PDF
• General technical dimensions (not a cutting template) — PDF
• Scivola Tre Class privacy machining drawing — PDF
• Scivola Tre Class cylinder machining drawing — PDF

Source: original AGB technical documents. For swinging doors obtain the specific Polaris Wave machining drawing for the selected backset and function; the brochure does not replace an execution drawing.