AGB Scivola Tre Class blind plate with pull-out lever B08984

Complete Wave system — matching components

Below are the configurations compatible with this item and their matching components. Choose one configuration for the door type and function; do not combine alternative configurations. Every item is purchased separately; check package contents, dimensions and finish before ordering.

Components and compatible configurations

Each item is listed once. The final column identifies the configurations where it is used: choose one handle and its matching combination, not every item listed.

	Component	When needed	Qty per door		Compatible configuration
	AGB Wave passage handles – sliding doors	Handle kit for this configuration	1	Model / finish / codeSelect a variantB300000101S — Door thickness up to 60 mm / Anodized brushed silver (01S)B300000132 — Door thickness up to 60 mm / Satin chromium plated (32)B300000142S — Door thickness up to 60 mm / Satin light bronze (42S)B300000158S — Door thickness up to 60 mm / Satin matt brass plated (58S)B300000193 — Door thickness up to 60 mm / Matt black (93)B3000001FM — Door thickness up to 60 mm / Matt white (FM) Quantity Add to cartAdd to quotation	AGB Wave passage handles – sliding doors
	AGB Scivola Tre Class blind plate with pull-out lever B08984	Passage-door extraction/pull option: check door preparation	1	Model / finish / codeSelect a variantB089843502 — Blind plate for sliding leaf — Bronze plated (B089843502)B089843503 — Blind plate for sliding leaf — Enamelled brass plated (B089843503)B089843506 — Blind plate for sliding leaf — Nickel plated (B089843506)B089843534 — Blind plate for sliding leaf — Matt chromium plated (B089843534)B089843542 — Blind plate for sliding leaf — Light bronze plated (B089843542)B089843593 — Blind plate for sliding leaf — Black (B089843593)B0898435FM — Blind plate for sliding leaf — Matt white (B0898435FM) Quantity Add to cartAdd to quotation	AGB Wave passage handles – sliding doors

The configurations above are alternatives. This item appears in the checklist to show the complete system: do not add it twice.

Machining and installation: dedicated Wave preparation

Standard lever-handle drilling is insufficient: Wave needs recessed seats on both door faces, a coordinated lock mortice and frame preparation. Check existing holes and door construction before conversion; this is not a universal replacement.

1. Identify swinging/sliding door, passage/privacy/cylinder function, thickness, rebate, backset and lock position.
2. Give the installer the AGB drawing for the exact combination. Privacy and cylinder versions may place the handle differently; outside plate dimensions are not a routing template.
3. Machine the recesses, mortice and striker seats from that drawing; choose the supplied sleeves and screws from the AGB door-thickness table.
4. Fit the lock and correctly oriented handles, then the covers. Secure the cylinder only after fitting the handle and cover.
5. Align and adjust the striker; test operation with the door open, then closed. For sliding doors also check leaf extraction and the pull-out lever.

The sleeve and screw lengths in the manual refer to kit hardware: check the supplied contents before ordering extras. A qualified installer must use the drawing matching the ordered variant.

Original AGB documentation

• Assembly instructions IT/EN — PDF
• General technical dimensions (not a cutting template) — PDF
• Scivola Tre Class privacy machining drawing — PDF
• Scivola Tre Class cylinder machining drawing — PDF

Source: original AGB technical documents. For swinging doors obtain the specific Polaris Wave machining drawing for the selected backset and function; the brochure does not replace an execution drawing.