Serie 4 shower mixer, two or three outlets with diverter — F4000 body excluded — FIMA F3769X6

Serie 4 shower mixer, two or three outlets with diverter — F4000 body excluded — FIMA F3769X6

External Serie 4 shower mixer trim, two or three outlets with diverter, chrome finish. Requires separately sold concealed body F4000. Price is for the external trim only.

Selection and installation

Requires one F4000 body, shown in the required components section. Rectangular plate 102 × 262 mm, thickness 9 mm; control centres 80 mm apart. Dimensioned external projection 53–83 mm at the selector and 57–87 mm at the mixer. Projection is not the concealed installation depth: consult the body drawing for its position against the finished wall. The two- or three-outlet arrangement depends on the F4000 body connections specified in its manual; do not assume simultaneous discharge. This code is the mechanical version, not thermostatic; the shared manual also describes other versions. Overhead showers, hand showers, hoses and water outlets are excluded.

Fitting and care

Have a qualified installer prepare, fit and leak-test the assembly. Flush pipework before connection and check seals. Clean with a soft cloth and a chrome-compatible neutral cleaner, without abrasives.

Documentation

The specific F3769X6 technical drawing, parts diagram and official instructions are linked below. The shared manual covers the F4000 body: follow its specific sequence before fitting the external trim. Have the installer check connections, operating conditions and finished wall; pressure-test values are not normal operating pressures.

Technical documents

• Installation instructions
• Technical drawing
• 3D file
• Spare parts