Slide two-outlet diverter — concealed body excluded — FIMA F5803N2

Slide two-outlet diverter — concealed body excluded — FIMA F5803N2

Slide diverter trim with one inlet and two outlets. Requires the separately sold F3040 body. The diverter does not mix hot and cold water; provide a suitable upstream mixing system.

Selection, dimensions and fitting

Ø70 mm rosette, Ø48 mm control, 7 mm rosette thickness and dimensioned external projection 73–108 mm. Do not use this as the installation depth; refer to the F3040 body drawing. Check the two outlet routes and upstream mixer with the installer; having two outlets does not establish simultaneous operation. No manufacturer-unverified pairing is proposed.

Customisation

The standard trim handles are included. Decorative F1420 handles are sold separately as individual pieces; one compatible piece customises this control.

Fitting and care

Have a qualified installer fit, check connections and leak-test the assembly. Check finished wall thickness before preparing the concealed installation. Clean with a soft cloth and a finish-compatible neutral cleaner, avoiding abrasives.

Documentation

The drawing and parts diagram are specific to F5803N2. The manual linked by the official product page is titled F3050; it is identified as a shared document and does not replace the required F3040 body instructions on that body’s page. Do not order F3050 for this diverter.

Technical documents

• Installation instructions
• Technical drawing
• Technical drawing in DWG
• 3D file
• Spare parts