Slide thermostatic mixer with two-outlet diverter — body excluded — FIMA F5803N7

Slide thermostatic mixer with two-outlet diverter — body excluded — FIMA F5803N7

Slide thermostatic and two-outlet diverter trim with two controls. Required F3090 concealed body is sold separately. Six finishes; optional F1420 handles customise the controls.

Selection, dimensions and fitting

Two Ø70 mm rosettes and Ø48 mm controls; dimensioned external projection 76–111 mm, rosette thickness 7 mm and minimum control centres 110 mm. Projection dimensions are not concealed installation depths. Before purchase and fitting, check heater compatibility, system pressures and calibration against the exact F3090 body instructions. Two outlets alone do not establish simultaneous discharge. Overhead showers, hand showers and other water outlets are excluded.

Customisation

The standard trim handles are included. Decorative F1420 handles are sold separately as individual pieces; customising both controls requires two pieces, which may use different materials.

Fitting and care

Have a qualified installer fit, check connections and leak-test the assembly. Check finished wall thickness before preparing the concealed installation. Clean with a soft cloth and a finish-compatible neutral cleaner, avoiding abrasives.

Documentation

The official trim page provides the F5803N7 drawing and parts diagram without a separate manual. The required F3090 component page carries the body instructions.

Technical documents

• Technical drawing
• Technical drawing in DWG
• 3D file
• Spare parts